14
NOTE:
The unit will automatically search for the time signal at 1.
2:00 AM, 8:00 AM, 2:00 PM and 8:00 PM each day.
Always place the unit away from interfering sources 2.
such as a TV, computer, etc.
Avoid placing the unit on or next to metal plates.3.
Closed areas such as an airport, basement, tower block 4.
or factory are not recommended.
Do not start reception on moving articles such as 5.
vehicles or trains.
DAYLIGHT SAVINGS TIME (DST)
The clock has been programmed automatically to switch 1.
when the daylight savings time is in effect. Your clock
will show “DST” during the summer.
pressing the “RESET” key), the clock starts receiving the
time signals and the reception display ashes.
SIGNAL QUALITY INDICATOR
If the signal indicator on the transmitter ashes once in one
second, it indicates that the signal quality is poor. If the sig-
nal indicator ashes twice in one second, it means that the
signal quality is strong.
To Next Page
Loading...