TRG C8243 - TIME ZONE SETTING; MANUAL TIME AND CALENDAR SETTING

15
TIME ZONE SETTING (U.S. & Canadian version only)
The default time zone is PACIFIC time zone. 1.
TO CHANGE YOUR TIME ZONE
In normal time mode, press the “ALARM” key to enter 1.
the alarm time mode.
In alarm time mode, press the “DOWN” key to select 2.
the proper time zone: P=Pacic M=Mountain C=Central
E=Eastern.
After you complete the setting, press the “TIME” key 3.
to exit the setting mode, or let it exit automatically 30
seconds later without pressing any key.
MANUAL TIME AND CALENDAR SETTING
If you are out of the reach of the radio controlled transmitter
or if the reception is not reachable, the time can be set
manually. As soon as the signal of transmitter is received
again, the clock will automatically synchronize with the exact
time.
In normal time mode, press and hold the “TIME” key for 1.
2 seconds until the hour digit ashes.
Press the “UP” or “DOWN” key to change the value of 2.
the ashing hour digit.
Repeat the above operation to set the time and 3.