4
3. After you complete the setting, press the “TIME” key
to exit the setting mode, or it will exit automatically 30
seconds later without pressing any key.
TO CHANGE BATTERIES
WEATHER STATION TRANSMITTER
1. Remove the transmitter from the stand and open the
battery door.
2. Insert 2 AA size batteries into the battery
compartment.
3. Close the battery door.
WEATHER STATION RECEIVER
1. Remove the battery door and insert 3 AA batteries
into the battery compartment.
2. Close the battery door.
3. Press the “RESET” key located behind the table
stand with a small object (Pencil tip, paperclip, etc) to
re-start the clock. It will synchronize the channels of the
transmitter automatically.
To Next Page
Loading...