5
IMPORTANT SAFETY NOTES
INTRODUCTION
The Aztec Instant Water Heater is a wall mounted instantaneous electric water heater. Once the water heater is switched on it is
fully controlled by an automatic management system which monitors the safety and running functions. Designed to provide
instantaneous hot water. The water heater produces hot water by passing water over electric heating elements housed in an
insulated heat exchanger.
The boilers incorporate inverter constant temperature technology which automatically adjusts output to match demand.
Read these instructions before installing your boiler.
The electrical wiring must comply with the latest edition of the Electrical Wiring Regulations BS 7671.
1. Always switch OFF the electrical supply before working on the hot water system.
2. If any part of the water heater is modified, then the warranty will be invalidated.
3. This appliance must be earthed
We recommend that you keep these instructions in a place near your appliance for easy reference.
The Trianco Aztec Instant Water Heater has been designed to conform to
European Directive/Standards EN60335-1:2002 +A15:2011, EN60335-2-35:2002 inc Amd 1,
EN55014-1:2006 +A1:2009, EN55014-2:1997 +A2:2008.
THE PERSON(S) WHO INSTALLS THIS APPLIANCE, SERVICES OR CARRIES OUT ANY REMEDIAL WORK, I.E.
ELECTRICAL FAULT FINDING, MUST HAVE SUITABLE ENGINEERING QUALIFICATIONS.
WARNING: DO NOT SWITCH ON THIS APPLIANCE IF THERE IS ANY POSSIBILITY THAT THE WATER MAY BE
FROZEN.
THE INSTALLATION OF THIS APPLIANCE MUST MEET THE REQUIREMENTS OF THE CURRENT ISSUE FOR
ELECTRICAL INSTALLATIONS IEE WIRING.
To Next Page
Loading...
