Do you have a question about the Triax S-HD 207 and is the answer not in the manual?
HDTV Compatible | Yes |
---|---|
Frequency Range | 950 - 2150 MHz |
Loop Through | Yes |
Type | Digital Satellite Receiver |
Output | HDMI, SCART |
Connectors | HDMI, SCART, USB |
Input Level Range | -65 to -25 dBm |
LNB Power Supply | 13V/18V |
DiSEqC Compatibility | 1.0/1.1/1.2 |
Video Decoding | MPEG-2, MPEG-4, H.264 |
Audio Decoding | MPEG-1 Layer 1/2 |
Instructions for connecting the mains adapter and power socket safely.
Procedures for handling adapter/socket damage and risks of unauthorized repair.
Detailed explanation of each button on the remote control and its function.
Selecting the type of satellite antenna system: Standard or SCR.
Powering the receiver on/off, using standby modes, and switching between TV/Radio.
Methods for selecting channels using directional keys, numeric input, or channel list.
Activating/deactivating the device lock requiring a PIN for use.
Procedure for changing the 4-digit PIN code for parental lock.
Setting up antenna parameters like satellite, LNB power, and band frequencies.
Steps to initiate a channel scan, select satellite, search mode, and encryption.
Resetting the receiver to its default factory status and initial installation.
Entering the software download menu to check for and initiate updates.
Choosing which data to download: software, channel list, OSD texts, or information.
Initiating the download process, monitoring progress, and handling storage or cancellation.
Programming a timed recording for a connected hard disk or video recorder.
Step-by-step guide to setting up a record timer, including index, time, and station.
Modes of recording programmes onto the mass storage device.
Starting instant recordings and scheduling recordings in advance.
Recording and playing back programmes simultaneously, allowing time-delayed viewing.
Troubleshooting receiver power, picture display, and audio output issues.
Addressing error messages like 'No valid signal' and performing system resets.