Need help?Do you have a question about the Triax ST-HD527 CI and is the answer not in the manual?
General| Tuner Type | DVB-S2 |
|---|---|
| Video Output | HDMI, SCART |
| Resolution | 1080p, 1080i, 720p, 576p, 576i |
| HDTV Compatible | Yes |
| CI Slot | Yes |
| Input Frequency Range | 950 - 2150 MHz |
| Demodulation | QPSK, 8PSK |
| DiSEqC | 1.0, 1.1, 1.2, USALS |
| Video Decoding | MPEG-2, MPEG-4/H.264 |
| HDMI Output | Yes |
| Ethernet | No |
| LNB Power | 13/18V DC, max. 400mA |
| Audio Decoding | MPEG-1 Layer I/II |
| USB Port | Yes |
| Power Supply | 100-240 V, 50/60 Hz |
| Symbol Rate | 2-45 Ms/s |
Crucial safety warnings and precautions for operating the receiver.
Guidelines for safe handling, storage, and disposal of batteries.
Statement of compliance with relevant EC directives and standards.
Overview of the receiver's capabilities, supported standards, and main features.
Safety advice for operation and instructions for unpacking the receiver.
Details the functions and layout of the remote control unit.
Descriptions of the receiver's front panel controls and rear panel connection ports.
Guides through the initial setup process, including easy installation.
Steps for searching and saving terrestrial and satellite channels, including parameters.
Configuration for antenna, LNB, DiSEqC, and other user installation settings.
Customizing OSD language, audio, subtitle, screen format, and resolution.
Procedures for air download software updates and setting up parental channel locks.
Resetting the receiver to default settings and viewing system information.
Using Conditional Access Modules (CAMs) and smartcards for encrypted content.
Organizing channels, creating favourite lists, and locking channels.
Using the HDD Manager for recording, viewing, managing programmes, and USB data transfer.
Utilizing the Electronic Program Guide and setting timers for recording or channel changes.
To Next Page
