Trident ModCom One - Headband Disassembly

ModCom One™ Quick Start Guide
Trident Communication Technology™ Company Confidential 6
Technical
Headset
Bluetooth®
V3.0
Bluetooth Profiles
Advanced Audio Distribution Profile (A2DP), Wideband Hands Free (HFP)
Profile 1.6, Headset (HSP) Profile 1.2 and Enhanced Date Rate (EDR)
Operating Time
Up to 16 Hours*
Operating Range
Up to 33 Feet (10 m) from Device
Operating Temperature
-22°F – +122°F (-30°C – +50°C)
Storage Temperature
-40°F – +122°F (-40°C – +50°C)
Weight
3 oz. (85 Grams)
Certification
FCC ID:2AEAB55596, IC:12773A-55596, CE0681 ! , WEEE, IP67
Battery
Type
3.7V Rechargeable, Replaceable Lithium-ion Polymer
Operating Temperature
-22°F – +122°F (-30°C – +50°C)*
Storage Temperature
-40°F – +122°F (-40°C – +50°C)
Life Cycle
500 Cycles, ≥ 80% Capacity at 0.5C Discharge Rate
Safety and Disposal
Refer to Battery Safety Guidelines on page 8
Certification
FCC ID:2AEAB55596, IC:12773A-55596, CE , WEEE, UL
Charger
Charging Time
Approximately 1.5 Hours; Max Time: 3 Hours ± 30 Minutes
Operating Temperature
+32°F – +122°F (0°C – +50°C)
Storage Temperature
-40°F – +122°F (-40°C – +50°C)
Certification
FCC ID:2AEAB55596, IC:12773A-55596, CE , WEEE, UL (AC/DC Adapter only)
NOTE * Performance is dependent upon Battery and may vary by Device and environment temperature.
Lower extreme temperatures will decrease the operating time.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Trident Communication Technology™ is under license. Other
trademarks and trade names are those of their respective owners.
Cleaning and Maintenance
To maintain the ModCom One™ Headset we suggest the following guidelines:
 Do not expose the Headset to harsh chemicals or cleaning agents.
 The Battery must be fully inserted and locked into place in order for it to become IP67
Waterproof. Do NOT immerse the Headset in water beyond 3 feet (1 meter) for beyond 30
minutes per IP-67 Specifications.
 If the Headset becomes dirty, wipe it with a soft damp cloth. Do not use soap, cleaning fluids or
chemicals.
 Keep dust, dirt and debris out of the Headset Battery Slot and the Battery Charger Slots.
 When handling the Headset Battery, keep the Battery Contacts free of dirt, grease, oil and other
substances that can affect the Battery from making proper contact with the Headset or Charger.
 Battery contacts must be covered with protective sleeve to prevent short circuit and discharge
after the Battery is removed from the headset.