Trident ModCom One - Position the Boom; Adjust Headband


PartNo:MC1ReferenceGuidev2.0 6

LastNumberRedial
PressVolume
+ andVolume–for
0.5Seconds
NoLEDOutput LongLow
VoiceActivation DoubleClickMFB NoLEDOutput OneShort
PositiontheBoom
Donotrotatetheboombeyondthestoppoint.
*AppliestoMonoandBinauralModel.TheBehindtheNeckmodelhasonlyleftsideboomplacement.


AdjustHeadband
Theheadbandcanbesqueezedforatighteroralooserfittothehead.Thestainlesssteelheadband
willclickasitislengthenedorshortenedintoacomfortableposition.Whenadjustingtheheadband:
 Positiontheearcushioninthecenteroftheear.
 PositiontheT
‐Barabovetheear,halfwaybetweenthetopoftheearandthetopofthehead.