8 | P a g e
TRIDENT AIR PLUS
WHEN MOVING
1. When moving the machine, ensure that it is unplugged.
2. To prevent the machine from falling and injuring people, grab the
handle on the side of the machine while moving; do not hold the front
panel.
NOTICE FOR CLEANING
1. Never wash the carbon filter with water.
2. Use caution when cleaning the equipment because harsh detergents
that are corrosive will scratch the surface.
3. Always use soft cloths to wipe machine surfaces; otherwise, they risk
being fractured or damaged.
4. Avoid using alcohol or other organic solvents to clean the device
because doing so could harm it or result in electric shock, fire, etc.
5. Please unplug the machine from the electrical outlet while cleaning
or not using the machine, as doing so could result in an electric shock
or a fire from a short circuit.
CLEANING & MAINTENANCE
INLET AND TOP OUTLET GRILLE CLEANING
1. To get rid of dust and debris, use a soft brush.
2. Avoid using any abrasives or cleaning pads on any sections of the
equipment and, if necessary, use a paper or cloth that has been
mildly moistened to remove big deposits.
VOC SENSOR CLEANING
Above the air inlet grille, on the machine's middle right side, is where you'll
find the VOC sensor.
1. To preserve precise smell identification, wipe away dust and debris
from the VOC sensor using a soft cloth.
2. Avoid tampering with the opening, or spraying water near the grille
aperture above the VOC sensor as this could void the sensor's
warranty.
PM2.5 SENSOR CLEANING
1. Remove the PM2.5 Sensor cover.
2. Clean the lens, air intake, and air output with a damp cotton swab.
3. To get rid of any remaining water stains on the dust sensor, use a dry
cotton swab.
4. Clean the PM2.5 sensor whenever readings are erratic.
To Next Page
Loading...