6.3.3. Table of functions
Function
Description
PowerOn behaviour
= Presence state
T1 effective range = Output 1 and Output 2
T1 short press = ON and OFF
T1 long press = dimming
T1 double click = Saving disabled
T2 effective range = Output 1 and Output 2
T2 short press = Only ON
T2 long press = dimming
T2 double click = Saving enabled
Relays = standby
Constant light control BrightOUT = enabled, dimming out after 10 minutes
Constant light control output 1 = automatic
Constant light control output 2 = automatic, no offset (0%)
Presence control mode = ON/OFF
Presence control run-on time = 1 min
Presence control absence value = 10 %