The instructions in this section have been compiled to ensure that operators and users of the basicDIM DGC from Tridonic are able to
detect potential risks in good time and take the necessary preventative measures.
The operator must ensure that all users fully understand these instructions and adhere to them. This device may only be installed and
configured by suitably qualified personnel.
2.1. Intended use
2.1.1. Proper use
Control module for the operation of DALI/DSI compatible luminaires. The device may only be used for this intended purpose.
2.1.2. Improper use
Outdoor use. Extensions and modifications to the product.
2.2. Dangers associated with the operation of the system
...
½ WARNING!
Improper use could result in injury, malfunction or damage to property.
It must be ensured that the operator informs every user of existing hazards.
½ DANGER!
Danger of electrocution
Disconnect the power to the entire lighting system before working on the lighting system!
½ CAUTION!
Risk of damage caused by condensation
Prior to commissioning the system, wait until the control device is at room temperature and completely dry!
½ CAUTION!
Risk of damage caused by humidity
Only use the control device in dry rooms and protect it against humidity!
½ CAUTION!
Electromagnetic compatibility (EMC)
Although the Tridonic control device meets the stringent requirements of the appropriate directives and standards on
electromagnetic compatibility, it could potentially interfere with other devices under certain circumstances!
To Next Page
Loading...
Need help?
General