6.4.3. Table of functions
Function
Description
PowerOn behaviour
= Presence state
T1 effective range = Output 1 and Output 2
T1 short press = ON and OFF
T1 long press = disabled
T1 double click = Saving is blocked
T2 effective range = Relay
T2 short press = Only ON
=> only possible, if Output 1 is ON !
T2 long press = disabled
T2 double click = Saving is blocked
Relays = only OFF
Constant light control BrightOUT = enabled, dimming out after 10 minutes
Constant light control output 1 = automatic
Constant light control output 2 = manual
Presence control mode = ON/OFF
Presence control run-on time = 20 min
Presence control absence value = 0 %
To Next Page
Loading...