WARRANTY
We at AlphaLab, Inc. are very proud of our products and back each one we sell with the following
warranty:
AlphaLab, Inc. warrants this product, when purchased from AlphaLab, Inc. or an authorized
AlphaLab, Inc. dealer, to be free from defects in materials and workmanship under normal use
and service. This warranty is valid to the original purchaser only and is non-transferable.
AlphaLab, Inc.’s liability under this warranty is limited to repairing or replacing defective
materials that show evidence of defect, provided the product is returned to AlphaLab, Inc. where
all parts and labor will be covered up to a period of one year.
The consumer forfeits the benets of this warranty if the product’s main assembly is opened and
tampered with by anyone other than an authorized AlphaLab, Inc. technician.
The foregoing is in lieu of all other warranties, expressed or implied, and AlphaLab, Inc. neither
assumes nor authorizes any person to assume any obligation or liability in connection with
the sale of this product. In no event shall AlphaLab, Inc. or its dealers be liable for special or
consequential damages or from any delay in the performance of this warranty due to causes
beyond their control.
TECHNICAL SUPPORT AND SERVICE
If you require support, please visit www.trield.com/support or send an email to
support@trield.com. Be prepared to describe the problem accurately. Before you return a
product to the factory for service, we recommend you refer to this manual. Make sure you have
correctly followed the operating procedures. Please refer to the Warranty information, which
extends to the rst end-user. After expiration of the warranty, a reasonable charge may be
made for parts, labor, and shipping if you choose to use the factory service facility. In all cases,
you are responsible for transportation charges to the factory. If a product is still under warranty,
AlphaLab, Inc. will pay the return shipping.
DISCLAIMER
Use of the meter is solely at the user’s discretion to identify exposure to non-ionizing electromagnetism.
Because a meter of this type may malfunction, the user’s responsibility is to determine if the meter is
working properly, by using it to measure a known reference. Manufacturer or dealer cannot assume
responsibility for damages resulting either from a defective meter (except to replace or repair said meter
within the warranty period) or from inaccuracies in the present body of knowledge concerning potential
health hazards of electromagnetism. The meter should be used so that simple steps (such as moving
furniture) can be taken to reduce relative exposure within a home or oce. If more drastic actions are
contemplated, consult expert advice, and perform independent tests with another type of meter.
8
To Previous Page
Loading...
Need help?
General