OVERVIEW
Introduction
The TriField
®
EMF Meter is an AC gaussmeter, AC electric eld meter, and radio power density
meter in a single unit, that combines all the features needed for fast, accurate measurements
of electromagnetic elds (EMF). In addition to standard AC measurement modes, a special
frequency weighted mode will properly scale the magnetic and electric measurements to
indicate the full magnitude of currents produced by each type of eld inside the human body.
Features
• Detects all three types of EMF pollution: AC magnetic, AC electric, and RF/microwave
• Special frequency weighting mode for measuring electric current from EMF in the human body
• AC Magnetic Mode covers 40 Hz - 100 kHz with range of 0.1 - 100.0 milligauss (mG)
• AC Electric Mode covers 40 Hz - 100 kHz with range of 1 - 1000 volts per meter (V/m)
• RF Mode covers 20 MHz - 6 GHz with range of 0.001 - 19.999 milliwatts per square meter (mW/m
2
)
• AC magnetic measurements are 3-axis, allowing for quick readings, regardless of meter orientation
• Large liquid-crystal display (LCD) for crystal clear, accurate readings
• Adjustable backlight for use in low-light environments
• Audio Indicator emits sound that helps to pinpoint EMF sources
• Peak Hold captures fast pulses, for measuring fast digital signals
• Operates for more than 20 hours on a 9V battery, with a low battery indicator
Applications
• Mobile phone and cell tower RF radiation
• Smart meter RF radiation
• Wi-Fi router and Bluetooth RF radiation
• Overhead AC power line and transformer EMF emissions
• Laptop, refrigerator, circuit breaker box, etc. appliance EMF emission
• EMF emission inside aircraft and motor vehicles
• Microwave oven leak
• Location and EMF of wiring in walls
• EMF from plumbing pipes used as grounding
1
To Next Page