TY96/97 CS-STAN Installation Guide 10 November 2016
SUP/TY96/004 Issue 1.0
______________________
Trig Avionics Limited Page 8
3.6.2 Form 123 Completion Instructions
Use English or the official language of the State of registry to fill in the form.
1. Identify the SC/SR with a unique number and reference this number in the aircraft logbook.
2. Specify the applicable EASA CS-SC/SR chapter, title & revision.
3. Identify the a/c serial number and aircraft type.
4. List the parts' numbers and parts' description for the parts installed. Refer to an auxiliary document if
necessary.
5. Identify affected aircraft manuals.
6. Refer to the documentation developed to support the SC/SR and its embodiment, including design
data required by the CS-SC/SR: design definition, documents recording the showing of compliance
with the Certification Specifications or any test result, etc. The documents' references should quote
their revision/issue.
7. Identify instructions for continuing airworthiness that need to be considered for the aircraft
Maintenance programme review.
8. To be used as deemed necessary by the installer.
9a.,Standard Change – tick and identify applicable section of CS-STAN
9b.,Standard Repair
10. Enter Date.
11. Give full name details and certificate reference used for issuing the aircraft release to service.
12. Aircraft owner must print name, sign and date.
To Previous Page
Loading...
