EasyManua.ls Logo

Trigon Electronics Miniguard HF-2 Series User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
255 GLIDER CIRCLE• CORONA, CA 92880
(951) 371-1730 • Facsimile (951) 371-2592
October 28, 2004
Miniguard HF-2 Series
Handsfree Telephone Entry Autodialer
INSTALLATION
and
OPERATIONAL INSTRUCTIONS
(Firmware revision #020700 Rev. A HF2XTRA)
with 10 number rollover
Question and Answer IconNeed help?

Do you have a question about the Trigon Electronics Miniguard HF-2 Series and is the answer not in the manual?

Trigon Electronics Miniguard HF-2 Series Specifications

General IconGeneral
BrandTrigon Electronics
ModelMiniguard HF-2 Series
CategoryIntercom System
LanguageEnglish

Summary

Mounting and Wiring

Wiring Specifications and Procedures

Covers power, ground, Telco line, relay, and RS-232 wiring requirements and best practices.

Programming the Miniguard HF-2

Entering Program Mode

Step-by-step guide on how to access the unit's programming functions via phone.

Setting Operational Modes

Configures the unit for Standard or Emergency mode for different operational needs.

Setting Autodial Telephone Numbers

Procedure for entering primary and up to nine backup phone numbers for autodialing.

Verifying Programmed Numbers

Instructions to confirm that telephone numbers have been correctly entered.

Changing Program Access Number

Procedure to change the default or previously set programming access code.

Setting Relay Duration Timer

Defines how long the primary and secondary relays remain activated.

Miniguard HF-2 Operation

Troubleshooting Guide

No Dial Tone Issues

Diagnoses common problems preventing the unit from establishing a dial tone.

Programming Problems

Addresses difficulties encountered when trying to program the HF-2 unit.

Related product manuals