Need help?Do you have a question about the Trigon Electronics Minipak 2000 and is the answer not in the manual?
How to modify the primary access code for programming.
The specific key sequence to initiate programming mode.
The command to terminate the programming session.
Details on setting a new 4-digit programming code and its importance.
Explains resident options (0, 7, 4) for visitor entry and communication.
How to enable or disable the T.E.D. feature for quicker testing.
Command to set dialing functions and options for call progress.
Details the format for assigning resident codes and phone numbers.
Command and process for entering or modifying resident names.
How to assign a new entry code to a resident's position.
Procedure for removing resident entry codes.
How to assign a new card code to a resident's position.
Procedure for removing resident card codes.
Detailed command format for setting Year, Month, Date, Hours, Minutes, Day.
Table mapping functions to tones when the unit dials out.
Table mapping functions to tones when the unit is called.
Command to assign tones for functions when the unit dials out.
Command to assign tones for functions when the unit is called.
Default actions for resident key presses (0, 7, 4, #).
Details of 12VAC power input and door strike/gate operator connections.
Connections for telephone line and modem/LAN interface.
Wiring for card readers and Wiegand data inputs.
Commands for performing a master erase with extreme caution.
General| Brand | Trigon Electronics |
|---|---|
| Model | Minipak 2000 |
| Category | Intercom System |
| Language | English |
To Next Page
