Now the keys 1 to 10 (see figure 4) are a “number keyboard”, whereby the key 10 stands
for the number “0”. As long as the LED on the remote control is constantly lit, you can
directly enter the track number. After entering the corresponding number (s), the selected
title starts playing automatically.
button (13) START
This button starts playback.
button (14) <<
If the button is held down during playback, the fast rewind starts.
button (15) >>
If the button is held down during playback, fast forward starts.
button (16) STOP
This button stops playback.
button (17) no function
This button has no function on the EXXCEED CD player.
button (18) no function
This button has no function on the EXXCEED CD player.
button (19) Device selection
This button is used to set the remote control to the device to be operated.
An LED shows which device is currently set.
The central LED must be set to operate the EXXCEED CD player. With each remote
control command, the set LED flickers in time with the IR code. This also gives you an
optical control of which device is currently selected.
To Next Page
Loading...