5 The menue
Various settings can be made on the Exxceed CD player. A long press on the button
[1] or button (5) on the remote control opens the settings menu.
There are four menus here:
Filter Color
Power Management IR-Remote
The green dot in front of each menu shows which menu is currently selected. The
selection is made with the buttons [2] and [5] on the EXXCEED or with the buttons (7)
and (9) on the remote control. These buttons are the navigation buttons. With the key [4]
on the EXXCEED and the key (8) on the remote control the selected menu is called up.
5.1 Filter
The DAC built into the EXXCEED CD player enables various filter settings. Select a
filter with the navigation buttons and then exit the menu with the [1] button on the
EXXCEED or the (4) button on the remote control. A CD is now played back using the
set filter.
5.2 Power Management
Three settings can be made in this menu:
Display Timeout
LED Bightness
Power Timeout
Use the navigation buttons to select the desired setting (green dot). Now press the button
[4] on the device or button (8) on the remote control to get to the setting. The dot now
lights up red. You can now set the parameters using the navigation buttons. After setting,
complete the setting by pressing button [4] on the device or button (8) on the remote
control. To exit the Power Management submenu, press the button [1] on the device or
button (4) on the remote control.
To Next Page
Loading...