EASyCAST - Installation Manual
19
Audio inputs - Two balanced line-level audio inputs are provided for additional EAS
monitoring sources. These inputs can be connected to EAS audio sources such as TV tuners,
satellite receivers, or external radio tuners.
(I5+) Balanced audio positive input channel 5
(I5-) Balanced audio negative input channel 5
(I6+) Balanced audio positive input channel 6
(I6-) Balanced audio negative input channel 6
(G) Ground or shield
Audio outputs - EAS audio is available on these four line-level balanced audio
outputs. Use these outputs to connect to EAS distribution/routing equipment or studio
speakers. This is the audio generated by the EASyCAST during EAS activation.
(O1+) Balanced EAS audio output 1, positive output
(O1-) Balanced EAS audio output 1, negative output
(O2+) Balanced EAS audio output 2, positive output
(O2-) Balanced EAS audio output 2, negative output
(O3+) Balanced EAS audio output 3, positive output
(O3-) Balanced EAS audio output 3, negative output
(G) Ground
(O4+) Balanced EAS audio output 4, positive output
(O4-) Balanced EAS audio output 4, negative output
To Next Page
Loading...