Need help?Do you have a question about the Trillium Roto-Jet R11 and is the answer not in the manual?
General| Brand | Trillium |
|---|---|
| Model | Roto-Jet R11 |
| Category | Water Pump |
| Language | English |
Manual purpose and pump overview.
Explanation of the pump's unique design and operation.
How Roto-Jet pumps are designated and identified.
Recommended dismantling/assembly practices and work area preparation.
List of tools for disassembly and assembly.
List of stands for pump assembly and disassembly.
Details and diagrams of pump and rotor assembly stands.
Dimensions and specifications for the Model R11 pump.
Detailed sectional view of the R11 pump with component labels.
List of parts for the R11 pump with item numbers and descriptions.
Continued list of parts for the R11 pump.
Additional parts list for the R11 pump with notes.
Diagram illustrating seal options and related parts.
Step-by-step guide for replacing pump seals.
Recommended parts for seal replacement.
Recommended special tools for seal replacement.
Steps to prepare for seal disassembly.
Important precautions for seal replacement.
Step-by-step instructions for seal disassembly.
Step-by-step instructions for seal assembly.
Step-by-step guide for replacing pump bearings.
Recommended parts for bearing replacement.
Recommended special tools for bearing replacement.
Steps to prepare for bearing disassembly.
Important precautions for bearing replacement.
Step-by-step instructions for bearing disassembly.
Step-by-step instructions for bearing assembly.
Procedure for replacing manifold nozzle and O-ring.
Recommended parts for manifold/nozzle replacement.
Recommended special tools for manifold/nozzle replacement.
Steps to prepare for manifold/nozzle disassembly.
Important precautions for manifold/nozzle replacement.
Step-by-step instructions for manifold/nozzle disassembly.
Step-by-step instructions for manifold/nozzle assembly.
Procedures for replacing major pump components like rotor or cover.
Instructions for disassembling major components.
Procedures for hydrostatic pressure testing of components.
Assembly procedures for major components.
Procedure for hydrostatic testing of the manifold.
Procedure for hydrostatic testing of rotor and cover.
Filling the rotor cavity with fluid for balancing.
Positioning the key in the driveshaft for balancing.
Procedure for two-plane balancing and trim balancing.
Draining the rotor cavity and removing the rotor cover.
Measuring dimension "C" for bearing and seal location.
Using the shim chart to determine the number of shims required.
Installing the required number of shims.
Reassembling the bearing cap and checking the drain port orientation.
Rechecking dimension "C" and shim requirements.
Completing the assembly after shimming.
List of recommended minimum spare parts.
List of recommended maintenance supplies.
List of available accessories for the pump.
Information and instructions for ordering parts.
General policy on product improvement and parts ordering.
Instructions for accurately placing parts orders.
How to obtain assistance for ordering or technical issues.
To Next Page
