1
Quick Reference Card
RUN SCREEN
The Trimble® CFX-750™ display is a touchscreen display that is configured and run by tapping the icons that appear on the display screen. The
image below shows the run screen when using the Field-IQ™ system with firmware version 4.00.
Item Description Notes
c
Quick Access icon Access common Field-IQ settings, including tank setup and refill.
d
Pump arming status Pump armed Pump disarmed
e
Target rate The target application rate for the current rate switch position. This is the amount of product that you want to apply.
f
Actual rate The actual application rate. This is the amount of product that is currently being applied.
g
Rate switch position Indicates the current position of the rate switch. Rate 1
1
Rate 2
2
Manual
M
h
Section control Shows the current position of the section control
switch.
Automatic Manual
i
Location Shows the current location and material.
j
Master switch status Shows the current position of the master switch.
On
Off Jump start
k
Section and control Indicates the current status of the sections.
l
Sensor status You can add up to two sensors to this location with their setup name. For more information, see Sensor setup
(page 5).
Quick Reference Card
c
d
e
f
g
h
j
l
i
k
To Next Page
Need help?
General
