Trimble EZ-Guide 500 - Accessory Connections

CHAPTER
8
EZ-Guide 500 System Cabling Guide 65
Accessory Connections 8
In this chapter:
 Connecting a coverage switch to
the lightbar
 EZ-Guide 500 system with
coverage switch
 EZ-Guide 500 system with radar
cable
 EZ-Guide 500 system with radar
cable and coverage switch
 EZ-Steer 500 system with Krohne
flow meter
 Preparing the EZ-Guide 500
CAN 2 port connection cable
(P/N 63075)
 Preparing the EZ-Guide 500
COM 2 port connection cable
(P/N 63076)
 Adding a second USB port
 Connecting the LB25 lightbar to
an EZ-Guide 500 lightbar
This chapter shows how to connect a coverage
switch, radar cable, or a second COM or CAN
port to the EZ-Guide 500 lightbar.