Trimble M3 Total Station - Checking the instrument constant

8 Applications
108 Trimble M3 Total Station User Guide
The Select Point screen appears. Do one of the
following:
• To remeasure point A, press [F1] A.
• To measure point B, press [F2] B and then press
[MEAS/ENT] in the Measure Point B screen.
The
Select Point screen appears. Do one of the
following:
• To measure point C, press [F1] C and then press
[MEAS/ENT] in the Measure Point C screen.
• To measure point P, press [F2] P and then press
[MEAS/ENT] in the Measure Point P screen.