Trimble M3 Total Station User Manual

Trimble M3 Total Station User Guide 25
Overview of the Trimble M3 Total Station 2
23.2 Stack
Use the stack function to input a previously used
string.
1. Press
[F3] Stack when you are in an input
screen. A window appears that contains the
current contents in the stack memory.
2. To select a string from the stack list, press
[^] or
[v] and then press [MEAS/ENT] to insert the selected
string in the input screen.
3. To cancel the process, press
[ESC].
Note – The stack list can hold up to 5 strings used for
recording points.
20.1 List
Use the list function to input a string from the
registered list. The system maintains two lists: one for
the point number (point name), and one for the point
code.
1. Press
[F2] List when you are in an input screen.
A window appears that contains the current
contents in the list memory.
2. To select a list, press
[^] or [v] and then press
[MEAS/ENT] to insert the selected string in the
Point number or Point code field.
3. To cancel the process, press
[ESC].
Note – The lists can hold up to 254 point number or point codes. When you have a large
number of items, you can group them by using the Layer functionality. See Adding a layer,
page 46.

Trimble M3 Total Station Specifications

General

Brand	Trimble
Model	M3 Total Station
Category	Measuring Instruments
Language	English