Trimble M3 Total Station User Manual

3 Before Going to the Field
46 Trimble M3 Total Station User Guide
All the procedures that are used to edit a point name
list, are also used to edit a point code. See Managing
your list of point names, page 44. In addition, you can
add a layer. See Adding a layer, page 46.
Adding a layer
A layer is a folder to categorize a set of point codes.
This is especially useful when you have many codes
and need to quickly find and input the point code that
you want to use in the field.
1. Press
[F4] Layer in the point code list screen.
The
Add Layer screen appears.
2. Do one of the following:
– Use the keypad to enter a new value.
– To change the input mode, press
[F1] <abc>.
– To return to the previous screen, press
[ESC].
3. Press
[MEAS/ENT] to update the list.

Trimble M3 Total Station Specifications

General

Brand	Trimble
Model	M3 Total Station
Category	Measuring Instruments
Language	English