Trimble M3 Total Station User Manual

Trimble M3 Total Station User Guide 45
Before Going to the Field 3
Editing a point name or number
1. Press [F2] Edit in the point number list screen.
The
Edit Point Number screen appears.
2. Enter the required name or number. Press
[F1]
<abc> to change the input mode.
3. Press
[MEAS/ENT]. A confirmation screen appears.
Do one of the following:
– To return to the list without any change,
press
[F1] No.
– To accept the change and update the list,
press
[F4] Yes.
Deleting a point name or number
1. Highlight an item in the point number list screen
and then press
[F1] DEL. A confirmation screen
appears.
2. Do one of the following:
– To return to the list without deleting the
item, press
[F1] No.
– To delete the item, press
[F4] Yes.
Adding a point name or number
1. Press [F3] Add in the point number list screen.
The
Add screen appears.
2. Do one of the following:
– Use the keypad to enter a new value.
– To change the input mode, press
[F1] <ABC>.
– To return to the previous screen, press
[ESC].
3. Press
[MEAS/ENT] to update the list.
Managing your list of point codes
This screen shows the current point code list. Press
[^] or
[v] to select the point name or number, or a layer that
you want to edit or delete.
Note – A layer is a group of point codes with an arrow
showing at the end of the string.

Trimble M3 Total Station Specifications

General

Brand	Trimble
Model	M3 Total Station
Category	Measuring Instruments
Language	English