Do you have a question about the Triplett 630-NS and is the answer not in the manual?
Brand | Triplett |
---|---|
Model | 630-NS |
Category | Measuring Instruments |
Language | English |
Instructions to read the manual carefully before operating the tester.
Double-check switch settings and lead connections before making measurements.
Advice against touching exposed wiring or live parts of an electrical circuit.
Emphasizes caution when dealing with high voltage circuits and measurements.
Warning about hazards associated with high energy circuits.
Details ranges, accuracy, sensitivity, and max input voltage for DC measurements.
Details ranges, accuracy, sensitivity, frequency response, rectifier, and max input voltage for AC measurements.
Step-by-step guide for measuring DC millivolts using the VOM.
Step-by-step guide for measuring DC volts from 0.3V to 1200V.
Steps for measuring AC voltages in the lower ranges.
Steps for measuring AC voltages in the higher ranges.
Procedure for measuring DC current in milliamp ranges.
Procedure for measuring DC current in microamp ranges.
Procedure for measuring DC current in amp ranges.
Steps for measuring resistance using the X1 to X100K Ohms ranges.
Procedure for measuring output AC voltage in lower ranges.
Procedure for measuring output AC voltage in higher ranges.
Chart detailing voltage ranges, switch settings, and decibel values.
Details the black manmade leather carrying case for 630 series testers.
Describes padded carrying cases offering maximum protection for testers.
Adapter for measuring AC current without breaking conductors.
Accessory probes for measuring high voltages in equipment like TVs.
Instructions on replacing the batteries used in the ohmmeter circuits.
Guidance on replacing fuses, including cautions for correct types.
Information on VOM calibration and when to seek professional checks.
Method for cleaning the VOM's plastic window without damaging static dissipation.
Advice on handling, temperature, and storage for the VOM.
Guidelines for replacing components and making solder connections.
Instructions on returning the VOM for repair and providing necessary details.