Need help?Do you have a question about the Triplett CamView IP Pro and is the answer not in the manual?
Provides instructions on how to correctly install the rechargeable lithium-ion polymer battery.
Details the procedure for fully charging the device's battery before first use.
Step-by-step guide for testing IP cameras using the ONVIF protocol.
Instructions for testing standard and high-definition analog cameras.
Details how to use Time Domain Reflectometry for testing RJ45 Ethernet cables.
Guides on adjusting device settings and performing firmware upgrades.
General| Model | CamView IP Pro |
|---|---|
| Category | Measuring Instruments |
| Type | IP Camera Tester |
| Display | LCD |
| IP Camera Test | ONVIF, RTSP |
| Cable Test | Cable Tracer |
| Power over Ethernet (PoE) | 48V PoE |
| Power Supply | DC 12V/2A |
| Power | Rechargeable battery |
| Connectivity | Ethernet |
| Supported Protocols | ONVIF, RTSP |
| Battery Life | 10 hours |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 70°C |
To Next Page
