CamView IP Pro, Pro-C, and Pro+ User Manual 33
4.7 Device Settings and Updating the Firmware
4.7.1 Overview
There are many other features in the Tester that you can adjust or view, including the screen’s
language, Auto Shutoff delay, Serial Number, and so forth. There may also be times when you
need to update the firmware or export files to a computer.
4.7.2 Viewing and Changing Settings
On the Main Menu, highlight “Settings” (press the MODE button to enter the Main Menu if you are
not already on it; press the Up or Down Arrow Keys to highlight it). Once the “Settings” option is
highlighted, press the Right Arrow Key to access the Device Settings screen. (See next page for
a screen shot of the Device Settings screen.)
AUTO POWER OFF:
Use the Left and Right Arrow Keys to change the setting and press Iris+ to apply.
KEYPAD TONE:
Use the Left and Right Arrow Keys to change the setting and press Iris+ to apply.
The Keypad Tone setting does not affect the Audio Test function.
SCREEN LANGUAGE:
Use the Left and Right Arrow Keys to change the setting and press Iris+ to apply.
The tester supports multiple languages, including French and Spanish.
SCREEN BACKLIGHT:
Use the Left and Right Arrow Keys to change the setting and press Iris+ to apply
For outdoor use, a higher brightness will have better contrast, while a lower
brightness will consume less battery power.
SYSTEM TIME:
When the field is highlighted, use Focus+/- to change the hours in 24-hour time,
Zoom+/- to change the minutes, and the Left and Right Arrow Keys to change the
seconds, then press Iris+ to apply the changes.
SYSTEM DATE:
When the field is highlighted, use Focus+/- to change the year, Zoom+/- to change
the month, and the Left and Right Arrow Keys to change the day, then press
Iris+ to apply the changes.
To Next Page
Loading...
