Do you have a question about the Triplett CTX690 and is the answer not in the manual?
Type | Clamp Meter |
---|---|
Model | CTX690 |
Display | LCD |
Continuity Test | Yes |
Diode Test | Yes |
Safety Rating | CAT III 600V |
Frequency Range | 10Hz to 10kHz |
AC Current Range | 0.1A to 600A |
DC Current Range | 0.1A to 600A |
Temperature | -40 to 752°F (-40 to 400°C) |
Safety precautions to prevent electrical shock hazards during use.
Guidelines for connecting to live circuits and acceptable voltage limits.
Steps for tracing RJ45 cables in active/inactive networks using the toner and probe.
Procedure for tracing telephone lines using the RJ12 cable.
Critical warning against connecting to live AC circuits in OFF/LINE mode.
Safety instruction to use the continuity test only on unpowered circuits.
Important safety note regarding the use of talk battery mode with voltage.