9 www.triplett.com UM-CTX690
Supply Talk Battery Power
The talk battery mode should not be used with voltage present.
The Net Toner will supply power to operate handsets. This feature particularly
useful when two installers are working at terminal panels, and must have at
least one identified pair connected between them. This model allows the
installers to commutation using their handsets.*Please use a new battery to
enhance talk power supply.
1. With the left slide switch in the “Talk/Cont” position and the right slide
switch in the “Talk” position.
2. Using the red & black clips connect the handsets in series as shown
in the diagram.
3. Place both headsets “OFF HOOK” or “Talk” position to establish
communication.
4. When finished, move the left slide switch to “Off/Line” position to avoid
draining battery. No power drain in “Cont/Talk” mode with clip open
but the clips touching during storage could drain the battery.
To Next Page
Loading...
