Triplett CamView IP Pro Series User Manual

CamView IP Pro Series Combined User Manual 3
www.Triplett.com
1.2.7 Network Test
The Tester may be used to perform several Ethernet network test functions, including:
Network Sniff:
Monitors and displays Ethernet MAC IDs and IP addresses broadcast on the network
Subnet List:
Monitors and displays Ethernet MAC IDs and IP addresses broadcast on the selected
subnet according to IP and mask settings
Ping Test:
Performs the standard ping messaging response test on the specified destination IP
address
1.2.8 RJ45 Cable Test (CamView IP Pro-C, Pro+, and Pro-D Only)
The Tester may be used to check the condition of the RJ45 cable pairs (normal, open, short) and
perform a cable length measurement test using TDR.
1.2.9 Digital Multimeter (CamView IP Pro-D Only)
The CamView IP Pro-D model has a built-in digital multimeter.
1.3 Accessories
One each of the following items are included in the package:
• IP/Analog Camera Tester
• Lanyard
• Battery
• Battery Cover
• Tool Bag with Shoulder Strap
• POE Power Injector
• Network Cable
• BNC Cable
• RS485 Cable
• 12V Power Output Cable
• Audio Cable
• USB Cable
• Screen Protector Film
• Test Leads (Pro-D model only)

Triplett CamView IP Pro Series Specifications

General

Brand	Triplett
Model	CamView IP Pro Series
Category	Test Equipment
Language	English