To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite 1000 VA and is the answer not in the manual?
General| Model | SMART1000LCD |
|---|---|
| Input Voltage | 120V |
| Output Voltage | 120V |
| Form Factor | Tower |
| Frequency | 50/60 Hz |
| Battery Type | Sealed Lead Acid (SLA) |
| Communication Ports | USB |
Warnings related to where to install the UPS unit for safe and optimal operation.
Warnings about connecting the UPS to power sources and equipment.
Warnings regarding connecting life-support devices or using surge protectors with the UPS.
Safety precautions for handling and replacing UPS batteries.
Instructions on swapping UPS front panels to match equipment color.
How to install the UPS in a rack using mounting brackets.
Guidance on positioning the UPS on a desk or under a monitor.
Steps to connect the UPS to an electrical outlet and turn it on.
Guidance on plugging devices into the UPS outlets.
How to connect the UPS to a computer via a serial port.
Instructions for connecting the UPS to a computer using a USB cable.
Connecting the EPO port to an external switch for emergency shutdown.
Explanation of the POWER and MUTE/TEST button functions and modes.
Description of the POWER indicator light states and their meanings.
Explains the multicolored battery charge indicator light.
Details on the multicolored output load indicator light.
Meaning of the red REPLACE BATTERY indicator light.
Description of the UPS output AC outlets and their functions.
Explains the Serial, USB, and EPO ports for connectivity.
Details on the SNMP slot and ground lug connection.
Explanation of the input breaker and reset procedure.
How to adjust the power sensitivity dial for waveform variations.
Instructions for storing the UPS unit for extended periods.
Procedures for returning the UPS for repair or service.
Detailed steps for safely replacing UPS batteries.
Technical specifications for SMART750RM1U and SMART1000RM1U models.
Common features and technical details applicable to all models.
