To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite SmartOnline 10KVA and is the answer not in the manual?
General| Power Capacity | 10 kVA / 9 kW |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Form Factor | Tower |
| Efficiency | Up to 94% |
| Display | LCD |
| Input Voltage | 200V, 208V, 220V, 230V, 240V |
| Output Voltage | 200V, 208V, 220V, 230V, 240V |
| Battery Type | Sealed Lead Acid |
| Topology | Double-Conversion |
| Communication Ports | USB |
Warnings regarding the placement of the UPS unit.
Warnings related to connecting the UPS to power.
Warnings about connecting equipment to the UPS.
Guidelines for maintaining the UPS system.
Critical safety instructions for handling UPS batteries.
Instructions for mounting the UPS in a rack (4-post or 2-post).
Instructions for mounting the UPS in a tower configuration.
Description of the front panel controls and indicators on the power module.
Detailed description of rear panel features for power, transformer, and battery modules.
Safety precautions for hardwiring UPS systems.
Step-by-step guides for connecting different UPS module combinations.
Connecting the UPS via RS-232 for monitoring and control.
Connecting the UPS for contact-closure signals.
Connecting the UPS to an Emergency Power Off (EPO) circuit.
Procedures for turning the 5kVA UPS on, off, and into bypass mode.
Procedures for configuring and operating the 6kVA/10kVA UPS.
Describes the UPS's initial self-test sequence upon startup.
Explains normal UPS operating modes and LCD displays.
Details on UPS alarms, overload messages, and their handling.
Messages displayed during bypass mode and UPS shutdown conditions.
Guidelines for storing the UPS system.
Steps for obtaining service and contacting Tripp Lite support.
Details of the limited warranty and registration process.
