To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite SmartOnline and is the answer not in the manual?
General| Output power | 1600 W |
|---|---|
| Audible alarm(s) | No |
| Surge energy rating | 660 J |
| Output power capacity | 2.2 kVA |
| Emergency Power Off (EPO) | Yes |
| Dimensions (WxDxH) | 89 x 483 x 444 mm |
| Battery recharge time | 6 h |
| Typical backup time at full load | 5 min |
| Typical backup time at half load | 14 min |
| Form factor | Rackmount |
| Certification | CE, SASO |
| Product color | Black |
| Serial ports quantity | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Storage temperature (T-T) | -15 - 50 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Weight | 21600 g |
|---|---|
| Package weight | 27100 g |
Instructions for installing the UPS in a 4-post or 2-post rack configuration.
Instructions for installing the UPS in a tower position using base stands.
Description of the power module's front panel controls and indicators.
Details on rear panel features of power module, PDU, and battery module.
Safety precautions for electrical wiring connections.
Steps for connecting modules and powering on the UPS.
Connecting via USB or RS-232 for remote monitoring.
Connecting the EPO port for emergency shutdown.
Installing network cards for remote monitoring.
Steps for safely removing the UPS power/battery module.
Explanation of LED indicators in different operating modes.
Procedure for UPS self-testing and troubleshooting error messages.
Explanation of UPS operating modes: Online, Economy, On Battery, Bypass.
Guide to accessing and navigating the UPS setup menu.
Instructions for changing UPS password and display language.
Configuration for UPS startup and battery charger settings.
Configuration for battery low alarm and deep discharge tests.
Adjusting UPS output voltage and frequency converter settings.
Configuration for ECO, Industrial, and Redundancy output modes.
Viewing and clearing UPS fault and alarm logs.
Understanding self-diagnosis display sequences for AC and battery startup.
LCD display information for the UPS operating in Online Mode.
LCD display information for the UPS operating in Bypass Mode.
List of shutdown conditions and corresponding LCD messages.
Details on On Battery alarm, overload, and bypass messages.
Summary of shutdown conditions and their displayed messages.
