7
Operation
Manual Switching
To bring complete focus (audio, KVM, and USB) to a computer,
either:
• Press the Port Selection Pushbutton that corresponds to that
computer; or
• Press the Mode Selection Pushbutton once (the Mode icons
will illuminate), then press the Port Selection Pushbutton
that
corresponds to that computer (all three port icons will
illuminate)
Mouse Switching
For mouse port selection: Double-click the scroll wheel of your
USB mouse to cycle through the ports.
Notes:
• Mouse switching is only supported by USB 3-key scroll wheel mice.
• Mouse switching is disabled by default (see Hotkey Setting
• Mode to enable mouse switching).
•
Mouse switching is only supported when Mouse Emulation is enabled.
To Next Page
Loading...
