6
6. Control Panel
6.2.1 Macros
The Macro icon opens up a screen that provides access to two tabs: Hotkeys and User Macros. Each function is described in the following sections.
6.2.1.1 Hotkeys
Various actions related to manipulating the remote server can be accomplished via keyboard hotkey commands. The Hotkeys tab lets you configure
which hotkeys perform which actions. Hotkeys that invoke an action are shown to the right of its name. Click the checkbox to the left of an action’s
name to enable or disable its hotkey.
To change the hotkey for an action:
1. Highlight the desired hotkey and click the Set Hotkey button.
2. Press the combination of Function keys (one at a time) you want to use for the action. The Function key names appear in the Edit Hotkey field as
you press them.
Note: You can use the same function keys for more than one action as long as the key sequence is not the same. To cancel setting a hotkey
value, click Cancel. To clear an action’s Hotkeys field, click Clear.
3. When you have finished keying in your sequence, click Save.
To reset all hotkeys to their default values, click Reset.
To Next Page
Loading...
