4
Disclaimer
Before installation, check the following settings of your source(s)
and TV/monitor(s):
1. Set to display at 60 Hz. Double-check factory settings, as the
default may be set to a lower frequency (Hz) than advertised.
2. Ensure the input setting of your monitor is set at HDMI 2.0.
Some displays may have default setting at HDMI 1.4.
3. Verify your monitor has the HDR feature enabled. Some
displays may have this feature disabled as a factory setting.
4. Confirm the Ultra HD (UHD) Deep Color setting is enabled on
your TV/monitor. Confirm with your TV/monitor manufacturer
which HDMI ports support UHD Deep Color.
Note: If you wish to connect a local monitor to your installation, depending
on your TV/monitor make/model, the UHD Deep Color setting may need to
be disabled on your local TV/monitor to achieve 4K 60 Hz resolution.
20-02-173-933C55.indb 420-02-173-933C55.indb 4 3/18/2020 9:28:36 AM3/18/2020 9:28:36 AM
To Next Page
Loading...
Need help?
General
