To Next Page

To Previous Page

2. Web Conﬁguration Interface

The NetCommander IP can be accessed in two ways: locally via the local console OSD, or remotely via the Web Conﬁguration Interface. This

section details the Web Conﬁguration Interface, which can be used to access the computer/servers and other devices connected to the KVM,

as well as to conﬁgure the KVM’s settings and accounts.

2.1 Logging Into the Web Conﬁguration Interface

Notes:

• Before logging on the ﬁrst time, verify the latest Java version (1.8 or 1.9) is installed on your computer. If the Java Runtime Environment is not installed on

the client PC, a popup window similar to the one below will likely appear.

To resolve this issue, install a supported version of Java (1.8 or 1.9).

• Once a supported JRE has been installed, restart the browser and retry accessing the KVM Web Conﬁguration Interface.

• The installed version of Java may require the KVM Web Conﬁguration Interface be added to an exception list. In such cases, upon logging into the KVM

application, a popup window similar to the one below will appear.