Tripp Lite NGS8C2POE User Manual

6
Installation
1
2
4
3
1U Rack-mount Installation
1
Attach the mounting brackets to each side of the switch with the included screws. Be
sure the mounting bracket “ears” are facing forward.
2
Mount the switch with user-supplied rack-mount hardware.
Note: The user must determine the fitness of the rack-mount hardware to hold the unit in the rack
before installation.
3
Connect the switch to a properly
grounded outlet. The Power LED will
illuminate when the switch powers on.
4
Connect network cables to the network
switch.
17-04-027-93368F.indb 6 4/5/2017 3:47:20 PM

Tripp Lite NGS8C2POE Specifications

General

Brand	Tripp Lite
Model	NGS8C2POE
Category	Switch
Language	English