Tripp Lite NGS8C2POE User Manual

5
Installation
Desktop Installation
FLAT DESKTOP SURFACE
1
3
4
2
2
Connect the power supply to the switch.
The Power LED will illuminate when the
switch powers on.
3
Ensure adequate ventilation around the
switch for proper cooling.
4
Connect network cables to the network
switch.
1
Attach the four included rubber feet to
the bottom of the unit. Place the switch
on a flat desktop surface. Inspect and
install the power adapter to a proper AC
power source.
17-04-027-93368F.indb 5 4/5/2017 3:47:18 PM

Tripp Lite NGS8C2POE Specifications

General

Brand	Tripp Lite
Model	NGS8C2POE
Category	Switch
Language	English