To Next PageTo Next PageWhat to do if some loads are not receiving power from my Tripp Lite Power distribution unit?
If some loads are not receiving power from the Tripp Lite Power Distribution Unit (PDUB30 only), it may be due to a tripped circuit breaker on the PDU. Try resetting the PDU’s circuit breaker.
Why are loads not receiving power from my Tripp Lite Power distribution unit after resetting the circuit breaker?
If loads are not receiving power after resetting the circuit breaker on your Tripp Lite Power distribution unit, the connected load may be overloading the PDU. Try reducing the connected load.
What to do if the yellow light does not illuminate on my Tripp Lite Power distribution unit?
If the yellow light does not illuminate on your Tripp Lite Power distribution unit, it could be due to: * No utility power. In this case, contact your utility company or a qualified electrician. * The PDU is not plugged into the utility source. Ensure the PDU is connected to a compatible utility source.
How to troubleshoot a Tripp Lite Power distribution unit when the green light does not illuminate?
If the green light does not illuminate on your Tripp Lite Power distribution unit, it could be due to: * The UPS system having no output. Refer to the UPS manual for proper startup. * The input and output of the UPS not being connected to the PDU. Ensure that you connect the UPS input and output to the PDU.
General| Model | PDUB15 |
|---|---|
| Input Connection Type | NEMA 5-15P |
| Output Connection Type | NEMA 5-15R |
| Amperage | 15 A |
| Form Factor | 1U |
| Input Frequency | 50/60 Hz |
| Maximum Current | 15 A |
| Outlet Type | NEMA 5-15R |
| Input Voltage | 120V |
| Input Current | 15A |
| Mounting Type | Rack Mountable |
| Output Nominal Voltage | 120V |
| Input Nominal Voltage | 120V |
| Output Voltage | 120V |
| Operating Temperature | 0 to 40°C |
