To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite PDUH30HV19 and is the answer not in the manual?
General| Output Frequency Compatibility | 50/60 Hz |
|---|---|
| Output Amps | 30A |
| Input Phase | Single-Phase |
| Input Amps | 30A |
| Input Frequency | 50/60 Hz |
| Cord Length | 10 ft. |
| Input Voltage | 200-240V |
| Output Voltage | 200-240V |
| Output Nominal Voltage | 200/208/230/240V |
| Input Nominal Voltage | 200/208/230/240V |
Attaching the PDU to a rack using four user-supplied screws.
Mounting the PDU vertically in a rack after adjusting bracket orientation.
Attaching the PDU to a stable mounting surface using screws through brackets.
Securing the PDU to a surface beneath a counter using mounting brackets.
Details the different input plug types (L6-30P, IEC 309 Blue 32A) based on the PDU model.
Describes the AC output receptacles (C13, C19) that distribute power to connected equipment.
Explains the function of the circuit breaker and how to reset it after tripping.
Identifies the terminal used for connecting equipment chassis ground.
Details the 5-year limited warranty, exclusions, and terms for product defects.
Instructions to register the product online for quicker service and a chance to win prizes.
Information on product series numbers for regulatory compliance and identification purposes.
