1
2
3
A
B
C
3
1
After removing the protective covering, wrapping, foam insulation and other packing
materials (instructions found in the Unpacking Instructions guide attached to the outside of
the unit), remove the four bolts
A
securing the unit to the pallet with an appropriately sized
wrench.
2
Remove the two shipping brackets by pulling the top lip under and away from the unit
B
.
3
Position at least one person on each side of the unit and slowly push it toward the back of
the shipping pallet
C
until all four casters go over the edge of the pallet and touch the floor.
WARNING: Use at least one assistant when removing the unit from the pallet.
Unpacking
Note: Make sure the unit and attached pallet is placed on a level surface before unpacking.
To Next Page
Loading...
