Tripp Lite SRCOOLNET - Actions Menu

10
Installation
5-2
Configuring SRCOOLNET for Remote Setpoint Usage
To use the Remote Temperature Setpoint mode of operation, ensure that the device is
connected to SRCOOLNET and installed
A
.FromtheUserInterface,turnthe
SRCOOL12KunitONandclickthe'Remote'checkboxontheSRCOOLNETuser
interface
B
. Type in the temperature setpoint you wish the SRCOOL12K to target and
press ENTER.
Note: SRCOOLNET not shown to
scale. A self-adhesive Velcro strip is
included for mounting the
ENVIROSENSE.
ENVIROSENSE
MODULE
ENVIROSENSE
MODULE
SRCOOLNET
SRCOOLNET
A
13-08-187 93-32CA.indb 10 9/27/2013 9:25:21 AM