Tripp Lite SRCOOLNET - Introduction; System Requirements; Installation and Configuration; Default UPS System Shutdown Settings

2
The SRCOOLNET allows the user to communicate with and control Tripp Lite’s
SRCOOL12K and SRXCOOL12K spot coolers as manageable devices on a network
accessible via a Web Browser, Network Management Station or Telnet.
1 - Preparation
1-1
Confirm Package Contents: In addition to this manual, your package should
include the following:
• Configurationcable(73-1025)
• CD-ROMcontainingadditionaldocumentation
•100-240VACAdapterwithNEMA5-15PandCEE7/7Plug
•ENVIROSENSEModule
•ENVIROSENSEUserManual
• VelcroStrips
• RubberMountingFeet
1-2
Locate MAC Address: The12-digitMACaddress(000667xxxxxx)islocatedon
the underside of the SRCOOLNET.
1-3
Determine Network Installation Method: Ifyournetwork'sDHCPserverwill
assignadynamicIPaddresstotheSRCOOLNETautomatically,proceedto
2 - Dynamic IP Address Assignment.IfyouwillassignastaticIPaddressto
the SRCOOLNET manually, proceed to 3 - Static IP Address Assignment. If you
are uncertain which method to use, contact your network administrator for
assistance before continuing the installation process.
Installation
13-08-187 93-32CA.indb 2 9/27/2013 9:25:19 AM