3
4
5
WARRANTY REGISTRATION
Visit tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a
chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.
4
Finally, attach your facility’s system ground to the grounding lug at
the bottom of the bar. The lug can accommodate 2/0-14AWG wires.
3
Attach one end of the Grounding Strap to the bar using the
included M4 screws and washers. Next, attach the other end of
the Grounding Strap to the grounding provision on the intended
equipment.
Note: The instructions above are specific for mounting in Tripp Lite Open Frame
Racks. Mounting in other rack brands is possible, but will vary depending upon the
application. Several holes are provided along the grounding bar that will allow for a
workable installation into any brand’s rack configuration.
Installation
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
20-01-184 93-2935_RevB
To Next Page
Loading...
