Tripp Lite WEBCARDLXE User Manual

1
Owner’s Manual
SNMP/Web Management Accessory Card
Models: WEBCARDLX (AG-040A),
WEBCARDLXE (AG-06E5), WEBCARDLXMINI
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2022 Tripp Lite. All rights reserved.
Read this manual carefully before installation. A separate downloadable
User’s Guide can be found by going to tripplite.com/support and typing
WEBCARDLX in the search field. Refer to the User's Guide for additional
information about configuration and operation.
Este manual está disponible en español en la página de Tripp Lite: tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com
Русскоязычная версия настоящего руководства представлена на веб-сайте
компании Tripp Lite по адресу: tripplite.com
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
®
surge protector in our monthly drawing!
tripplite.com/warranty

Tripp Lite WEBCARDLXE Specifications

General

Brand	Tripp Lite
Model	WEBCARDLXE
Category	Computer Hardware
Language	English

Summary

Overview

Features

Ethernet Port

RJ45 jack for network connection. Link/Status LEDs indicate conditions.

Micro-USB Port

Connects to a computer for terminal emulation via included cable.

Type-A USB Port

Connects to ENVIROSENSE 2 module for environmental monitoring.

Reset Button

Recessed button to reboot or restore factory default settings.

Status LED

Indicates WEBCARDLX, WEBCARDLXE or WEBCARDLXMINI status.

Installation Preparation

Confirm Package Contents

Verify all included items and locate additional documentation.

Install UPS

Ensure UPS is installed and powered on before proceeding.

Locate MAC Address

Find the 12-digit MAC address on the card and duplicate label.

Insert Card into Slot

Install the WEBCARDLX card into the accessory slot of the UPS.

Address Assignment Options

Choose between Dynamic or Static IP Address Assignment.

Dynamic IP Address Assignment

Connect to Network

Connect the card to the network using an Ethernet cable.

Determine IP Address

Identify the assigned IP address via network admin or terminal connection.

Static IP Address Assignment

Determine IP Information

Configure static IPv4/IPv6 addresses, subnet mask, and gateway.

Configure Terminal Emulation

Set up terminal software for serial connection to the card.

Connect to Computer

Connect the PC to the card's Micro-USB port with the provided cable.

Configuration and Testing

Login and Menu Navigation

Login as localadmin/localadmin and navigate network configuration menus.

Assign IP Settings

Set static IP, subnet mask, gateway, and save settings.

Test Network Connection

Access the card via web browser using its assigned IP address.

Warranty and Product Registration

Limited Warranty

Details the 2-year warranty against defects and exclusions.

Product Registration

Register your product online for a chance to win a free product.

FCC Notice

Compliance statement regarding radio frequency interference.