Tripp Lite WEBCARDLX User Manual

1
Owner’s Manual
SNMP/Web Management Accessory Card
Model: WEBCARDLX
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
Read this manual carefully before installation. A separate downloadable
User’s Guide can be found by going to www.tripplite.com/support and typing
WEBCARDLX in the search field. Refer to the User's Guide for additional
information about configuration and operation.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com
Русскоязычная версия настоящего руководства представлена на веб-сайте
компании Tripp Lite по адресу: www.tripplite.com
18-02-314-93358E-EN.indd 1 2/26/2018 2:50:29 PM

Tripp Lite WEBCARDLX Specifications

General

Model	WEBCARDLX
Network Interface	10/100 Mbps Ethernet
Power Supply	Powered by UPS
Weight	0.5 lbs
Remote Access	Yes
SNMP Support	Yes
Device Type	Network management card
Category	Power Management
Compatibility	Compatible with Tripp Lite UPS systems
Management Protocols	HTTP, HTTPS, Telnet
Security Features	Password protection

Summary

Overview

Features

Ethernet Port

RJ45 jack for network connection, includes LED indicators.

Micro-USB Port

For direct computer connection via terminal emulation.

Type-A USB Port

For connecting environmental monitoring modules.

Reset Button

Recessed button for network interface reboot or factory reset.

Status LED

Indicates the WEBCARDLX status via LED behavior.

LED Indicators

Ethernet Link/Activity Indicator (A1)

Green LED indicating network activity or reset status.

Ethernet Network Speed Indicator (A2)

Yellow LED indicating network speed or reset status.

WEBCARDLX Status LED (E)

Green/Orange LED indicating normal operation or status updates.

Installation

1 - Preparation

Verify package contents, prepare UPS, locate MAC address, and insert card.

2 - Dynamic IP Address Assignment

Connect the card to the network and determine its IP address.

3 - Static IP Address Assignment

Configure terminal emulation and assign static IP address settings.

4 - Test and Configure

Test network connectivity and access the device via a web browser.

Technical Support

Warranty and Product Registration

Limited Warranty

Details the product's limited warranty terms and conditions.

Product Registration

Instructions for registering the product and potential prize drawings.

FCC Notice

Compliance information regarding FCC rules for digital devices.

Regulatory Compliance Identification Numbers

Information on unique series numbers for regulatory compliance.